亚博体育官网

亚博体育|即时比分|即时直播

登录    |    注册

您好,欢迎来到中国亚博体育资讯平台!

首页>《中国测试》期刊>本期导读>综合加速寿命试验与仿真的密封圈性能退化规律研究

综合加速寿命试验与仿真的密封圈性能退化规律研究

67    2019-09-29

¥0.00

全文售价

作者:边智1, 陈允2, 崔博源2, 孟理华1

作者单位:1. 中国航空综合技术研究所, 北京 100028;
2. 中国电力科学研究院有限公司, 北京 100192


关键词:资料失效与掩护;老化寿命评估;加速寿命试验;O型密封圈


摘要:

传统的密封圈寿命评估多采取加速寿命试验完成,由于评估用的失效判据(压缩永久变形)与实际密封性能难以关联,导致评估的寿命偏守旧。因此,该文提出基于回归分析的统计建模方法,运用仿真与实验综合分析密封圈的性能退化规律。首先,应用加速寿命试验得到不同使用状态的密封圈,并测试得到其性能参数。然后,通过仿真分析的方法得到各密封圈的接触应力。最后,应用统计分析的方法实现其整体退化规律的建模。该模型可以准确分析密封圈的退化规律,并依据密封圈失效准则,实现其寿命预测。


Research on the law of performance degradation of seal ring in accelerated lifetime test and simulation
BIAN Zhi1, CHEN Yun2, CUI Boyuan2, MENG Lihua1
1. AVIC China Aero-polytechnology Establishment, Beijing 100028, China;
2. China Electric Power Research Institute Co., Ltd., Beijing 100192, China
Abstract: The traditional aging life assessment of O-ring is mostly completed by the accelerated life test. The failure criterion used for evaluation (compression set) is difficult to relate with the actual seal performance (leakage rate), which result in that the life expectancy of the assessment is conservative. In view of the problems above, this paper puts forward a statistical modeling method which is based on regression analysis. This method uses simulation and experiment to synthetically analyze the degradation law of the aging performance of the O-ring. Firstly, accelerated life test is applied, to get O-rings with different states. And the performance parameters of these O-ring are tested. Then the contract stress of each O-ring is obtained through simulation analysis. Finally, the method of statistical analysis is applied to realize the modeling of O-ring's overall degradation law. The model can accurately analyze the degradation law of the O-ring and predict the life of the O-ring according to the failure criterion.
Keywords: failure and protection of materials;evaluation of aging life;accelerated life test;O seal ring
2019, 45(9):138-142,148  收稿日期: 2018-06-05;收到修改稿日期: 2018-07-26
基金项目:
作者简介: 边智(1986-),男,内蒙古呼和浩特市人,副高级工程师,硕士,研究方向为机械产品寿命预测及耐久性评估
参考文献
[1] 特雷劳尔L R G. 橡胶弹性物理力学[M]. 王梦蛟, 王培国, 薛广智, 译. 北京:化学工业出版社, 1982:20-192.
[2] BERNSTEIN R, GILLEN K T. Predicting the lifetime of fluorosilicone o-rings[J]. Polymer Degradation & Stability, 2009(94):2107-2113
[3] STEFEK T, DAUGHERTY W, SKIDMORE E. Status report for aging studies of EPDM O-ring material for the H1616 shipping package[C]//Office of Scientific & Technical Information Technical Reports, 2012.
[4] 成勇, 张欣, 刘宇, 等. GIS设备气密封O型圈老化及其使用寿命的试验研究[J]. 高压电器, 2016, 11(52):0088-0094
[5] 曾宪奎, 郝建国, 褚福海, 等. 潜水式污水泵用橡胶密封圈使用寿命研究[J]. 弹性体, 2016, 12(26):43-46
[6] 张凯, 马艳, 衣志勇, 等. O型三元乙丙橡胶密封圈的使用寿命预测[J]. 橡胶工业, 2014(61):746-749
[7] 肖坤, 顾晓辉. 某弹用O型密封圈热氧老化试验与寿命评估[J]. 弹箭与制导学报, 2013, 12(33):59-61
[8] PAN J, XU S W, CEHN W H, et al. Accelerated aging test and study of storage life predicition of nbr o-ring[J]. Advanced Materials Research, 2012(415):184-190
[9] KOMMLING A, JAUNICH M, WOLFF D. Effects of heterogeneous aging in compressed HNBR and EPDM O-ring seals[J]. Polymer Degradation & Stability, 2016(126):39-46
[10] 陈国强, 谭建平, 陈晖. 高压大流量水阀U形密封圈失效机理[J]. 中南大学学报(自然科学版), 2013, 44(3):942-948
[11] 蒋国璋, 陈少华, 谢良喜, 等. O形旋转密封圈的密封性能有限元分析[J]. 机械设计与制造, 2014, 6(6):178-181
[12] 刘洪宇, 王冰清, 孟祥铠, 等. 基于正交试验的高压X形密封圈结构优化[J]. 润滑与密封, 2017, 7(42):106-110
[13] 贾晓红, 李坤. 弹簧蓄能密封圈轴对称仿真模型建模方法研究[J]. 润滑与密封, 2015, 40(11):1-5
[14] 黄建龙, 解广娟, 刘正伟. 基于Mooney-Rivilin模型和Yeoh模型的超弹性橡胶资料有限元分析[J]. 橡胶工业, 2008, 55(8):467-471
[15] 钟亮, 赵俊利, 范社卫. 基于ABAQUS的O形密封圈密封性能仿真研究[J]. 煤矿机械, 2014, 35(3):52-54
[16] 吴长贵, 索双富, 张开会, 等. 基于ABAQUS的航空作动器VL密封圈有限元分析[J]. 液压与气动, 2016(1):60-65
[17] 甘屹, 刘胜, 张劲枫, 等. 旋转轴唇形密封圈的建模与仿真研究[J]. 润滑与密封, 2017, 42(6):73-78
[18] 闵志强, 胡云云, 顾丽. 基于多元线性回归的西昌市云南松蓄积量模型研究[J]. 西北林学院学报, 2017, 32(3):186-190
[19] 田垅, 刘宗田. 最小二乘法分段直线拟合[J]. 计算机科学, 2012, 39(6):482-484