登录    |    注册

您好,欢迎来到中国江苏快三开奖资讯平台!

首页>《中国测试》期刊>本期导读>指针式电学三表自动检定系统研制

指针式电学三表自动检定系统研制

83    2019-04-28

¥0.00

全文售价

作者:曾舒帆, 李亚娟, 朱自科, 陈万才, 张自长, 张颖超

作者单位:云南省计量测试技术研究院, 云南 昆明 650228


关键词:指针式仪表;自动检定;帧间差值剪影法;Hough变换;阈值逐次逼近法


摘要:

针对指针式电学三表无法实现全自动检定这一问题,该文设计并实现一套电学三表自动检定系统,通过一系列自动控制机制实现自动检定的硬件控制需求,提出应用帧间差值剪影法、Hough变换以及阈值逐次逼近法实现的实时动态指针识别算法,将指针信息转换为角度的方法可以满足准确快速的实时指针识别需求。建立的自动检定系统可以代替传统的检定方式,建立数据库以及数据处理系统用于数据的处理,整体实现指针式仪表的全自动检定,系统测试的综合误差优于0.03%。


Development of automatic verification system of pointer type electrical meter
ZENG Shufan, LI Yajuan, ZHU Zike, CHEN Wancai, ZHANG Zichang, ZHANG Yingchao
Yunnan Institute of Measuring and Testing Technology, Kunming 650228, China
Abstract: According to the requirement of automatic testing of pointer meter, this paper design and build an electrical meter automatic verification system, designed a series of automatic control mechanism to meet the automatic hardware control demand, put forward the application of inter frame difference method, Hough transform and threshold silhouette successive approximation method to achieve real-time dynamic pointer recognition algorithm to realize real-time dynamic recognition of pointer movement.The method of converting pointer information into angle proposed in this paper can meet the need of accurate and fast real-time pointer recognition. The automatic verification system can replace the traditional database,and establish database and data processing system for data processing, and realize the automatic verification of pointer instrument as a whole. The comprehensive error of the system test is better than 0.03%.
Keywords: pointer meter;automatic verification;inter frame difference silhouette method;Hough transform;threshold successive approximation method
2019, 45(4):104-108  收稿日期: 2018-05-08;收到修改稿日期: 2018-09-08
基金项目: 国家质检公益性行业科研专项(201410133)
作者简介: 曾舒帆(1982-),男,云南昆明市人,高级工程师,硕士,主要从事电学计量科研工作
参考文献
[1] CORRA A E,CRUZ S A. Automatic calibration of analog and digital measuring instruments using computer vision[J]. IEEE Transaction on Instrumentation and Measurement, 2000, 49(1):94-99
[2] SABLATNIG R, KROPATSCH W G.Application constraints in the design of an automatic reading device for analog display instruments[C]//Proceedings of the Second IEEE Workshop on IEEE, 1995.
[3] KIM K H, CHIEN S L, LEE Y B, et al. A Study on Analog and digital meter recognition based on image processing technique[J]. Joural of the Korean Institue of Telsmatics and Electronics, 1995, 32(9):79-94
[4] 龚雄文. 指针式仪表自动读数的研宄与应用[D]. 广州:广东工业大学, 2007.
[5] 王博, 秦岭松. 基于计算机视觉的指针式仪表自动检测系统[J]. 计算机工程, 2005(6):19-21
[6] 吴国良. 仪表的图像识别及智能图像监控方法研究[D]. 重庆:重庆大学, 2009.
[7] 段峰, 王耀南. 机器视觉技术及其应用综述[J]. 自动化博览, 2002(3):59-61
[8] 陈丽萍. 基于机器视觉技术的模拟射击训练系统研究与设计[D]. 厦门:厦门大学, 2012.
[9] 曹国斌, 刘雪較, 王花. 图像和机器视觉技术概述[J]. 测试与测量, 2008, 37(8):27-31