亚博体育官网

亚博体育|即时比分|即时直播

登录    |    注册

您好,欢迎来到中国亚博体育资讯平台!

首页>《中国测试》期刊>本期导读>边界热损失对TPS平板法丈量物质热导率的影响

边界热损失对TPS平板法丈量物质热导率的影响

1857    2018-11-29

¥0.50

全文售价

作者:张国靖, 李艳宁

作者单位:天津大学精密仪器与光电子工程学院, 天津 300072


关键词:导热系数;瞬态平面热源法;边界热损失;假想热源法;热探测深度


摘要:

假想热源法是基于瞬态平面热源(transient plane source,TPS)法丈量平板样品导热系数的理论基础,但是其没有考虑丈量过程中背景资料自身的有限热阻所导致的边界热损失,从而直接影响导热系数的丈量精度。该文基于假想热源法和热探测深度理论,建立一种可实现边界热损失弥补的数学模型。该数学模型揭示探头尺寸、样品厚度以及背景资料的导热系数和热扩散率对边界热损失的影响。为验证该数学模型的有效性,通过变换背景资料和探头尺寸对不锈钢、铅、45钢、Q235A.F钢、黄铜、6061铝合金、纯铝以及紫铜的导热系数进行丈量。结果表明:该数学模型能够对不同的探头尺寸、平板样品以及背景资料进行有效的热损失弥补,使导热系数的丈量误差从热损失弥补前的2.14%~3.49%减小到弥补后的-1.39%~0.80%,显著提高平板样品导热系数的丈量精度。


Effect of boundary heat loss on thermal conductivity measurement with TPS slab method

ZHANG Guojing, LI Yanning

School of Precision Instrument & Opto-Electronics Engineering, Tianjin University, Tianjin 300072, China

Abstract: Image source method is the theoretical basis for measurement of the thermal conductivity of slab samples based on the transient plane source(TPS) method. However, this theory neglects the boundary heat loss caused by the limited thermal resistance of the background materials during measurement, which directly influences the measurement accuracy of the thermal conductivity. Based on image source method and thermal probing depth theory, a mathematical model which could effectively compensate the boundary heat loss was built. The model revealed the influence of probe size, sample thickness and thermal conductivity and thermal diffusivity of background materials on boundary heat loss. In order to verify the effectiveness of the model, the thermal conductivity of stainless steel, lead, 45 steel, Q235A.F steel, brass and 6061 alloy, pure aluminium and red copper was measured by changing probes and background materials. The results show that the model can be applied to different probes, slab materials and background materials for effective heat loss compensation and the measurement error of the thermal conductivity can be decreased from 2.14%-3.49%(before heat loss compensation) to -1.39%-0.80%(after heat loss compensation), which significantly improves the measurement accuracy of the thermal conductivity of plane samples.

Keywords: thermal conductivity coefficient;transient plane source method;boundary heat loss;image source method;thermal probing depth

2018, 44(4): 130-136  收稿日期: 2017-07-23;收到修改稿日期: 2017-10-13

基金项目: 

作者简介: 张国靖(1991-),男,河北石家庄市人,硕士研究生,专业方向为仪器仪表工程。

参考文献

[1] 杨杰. 平面热源法对建筑保温资料热导率和热扩散率的测试研究[D]. 长沙:中南大学,2014.
[2] XIE T, HE Y L, HU Z J. Theoretical study on thermal conductivities of silica aerogel composite insulating material[J]. International Journal of Heat & Mass Transfer,2013,58(1/2):540-552.
[3] AL-AJLAN S A. Measurements of thermal properties of insulation materials by using transient plane source technique[J]. Applied Thermal Engineering,2006,26(17/18):2184-2191.
[4] GUSTAFSSON S E. Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials[J]. Review of Scientific Instruments,1991,62(3):797-804.
[5] LAGÜELA S, BISON P, PERON F, et al. Thermal conductivity measurements on wood materials with transient plane source technique[J]. Thermochimica Acta,2015,600:45-51.
[6] ZHANG H, LI M J, FANG W Z, et al. A numerical study on the theoretical accuracy of film thermal conductivity using transient plane source method[J]. Applied Thermal Engineering,2014,72(1):62-69.
[7] GUSTAVSSON M, KARAWACKI E, GUSTAFSSON S E. Thermal conductivity, thermal diffusivity and specific heat of thin samples from transient measurements with hot disk sensors[J]. Review of Scientific Instruments,1994,65(12):3856-3859.
[8] 翟德怀. 基于HotDisk的薄板资料导热系数丈量方法的研究[D]. 广州:华南理工大学,2015.
[9] 章熙民,朱彤,安青松,等. 传热学[M]. 北京:中国建筑工业出版社,2014:10-24.
[10] MALINARIČ S, DIEŠKA P. Concentric circular strips model of the transient plane source-sensor[J]. International Journal of Thermophysics,2015,36(4):692-700.
[11] Plastics-Determination of thermal conductivity and thermal diffusivity-Part 2:Transient plane heat source (hot disc) method:ISO 22007-2:2015[S]. 2015.
[12] BOHAC V, GUSTAVSSON M K, KUBICAR L, et al. Parameter estimations for measurements of thermal transport properties with the hot disk thermal constants analyzer[J]. Review of Scientific Instruments,2000,71(6):2452-2455.
[13] 王强,戴景民,何小瓦. 基于Hot Disk方法丈量热导率的影响因素[J]. 天津大学学报(自然科学与工程技术版),2009, 42(11):970-974.
[14] 何小瓦,黄丽萍. 瞬态平面热源法热物理性能丈量准确度和适用范围的标定——常温下尺度Pyroceram 9606资料热物理性能丈量[J]. 北京:宇航计测技术,2006,26(4):31-42,51.